LEGEND LOG WASH - LOW PH MAINTENANCE CLEANER
Legend LDF wash is a low PH liquid concentrate for cleaning log and wood surfaces. It can be used as a maintenance cleaner or to prep wood surfaces for a new coat of stain or topcoat. Legend LDF wash is a great way to remove pollen, dust and mold spores that collect on exterior wood surfaces without damaging the existing finish.
Keep your log surfaces free of environmental contaminates with maintain the beauty of your wood structure as well as extend the coating life. Annual maintenance cleanings are proven to extend the maintenance window on your finish system.
For wood surfaces with a failing coating or UV damage (grey patina) please see our Peroxide cleaners (Wood Renew / CPR) for the best results.
- Will not damage intact finishes
- Great for annual maintenance
- Will not harm chinking
- Great for surface prep
- Removes dust, dirt and pollen
- Low PH cleaner
APPLICATION:
Using the recommended solution ratio, apply Legend Log Deck & Fence Wash with a pump up
garden sprayer. Be sure to wet the surface prior to applying wash solution. Spread the solution
evenly across the surface before letting it sit for 5-15 minutes. For best results lightly scrub the
surface with a soft nylon scrub brush. Rinse the surface thoroughly working from the top to
bottom with a garden hose or the low pressure setting on your pressure washer.
MAINTENANCE CLEANING:
Maintenance solution ratio will help with the removal of pollen, mold spores, dust and grime
without harming the intact wood finishes. Always sample test an area before applying solution
to the whole surface. Apply with a pump up sprayer and rinse with garden hose or low pressure
sprayer.
Mix Ratio:
- 7 Pumps to a gallon of water
- 1 Cup to a gallon of water
SURFACE PREP/ BARE WOOD
Surface prep solution ratio is for bare wood prep before applying coatings. Legend Log Wash is
not intended to remove old coatings, water stains or wood discoloration. Apply with a pump up sprayer and rinse with garden hose or low pressure sprayer.
Mix Ratio:
- 14 Pumps to a gallon of water
- 2 Cups to a gallon of water
* EACH GALLON OF SOLUTION WITH CLEAN 150-250 SQUARE FEET.
TIPS:
- Wet surface before applying wash
- Do not let dry on wall
- Wash from the bottom up and rinse from the top down
- Use correct mix ratio for your application
- For best results avoid high pressure rinsing and use soft nylon brush for scubbing
- Rinse any wash residue off of plants or vegitation to avoid damage
- Annual cleaning of log, deck or fence surfaces will beautify and extend the life of stains and coatings.
WARNING:
- Do not ingest
- May cause skin & eye irritation
- Keep out of reach of children
- Use as directed
FIRST AID:
EYES:
Remove contacts. Flush for 15 minutes. Seek medical attention if symptoms persist.
SKIN:
Rinse skin thoroughly. Seek medical attention if irritation persists.
INGESTION:
Do not induce vomiting. Drink water. Seek medical attention.